The Pendulum Instruments High Voltage Linear Amplifier F20AD contains two independent F20A amplifiers that share common ground reference and power supply. This unit has a fixed amplification of 20 times and capable of bipolar high voltage output of ±150V. Any signal source with amplitude up to ±10 V can be used as an input device.
The input amplitude should normally be kept within ±7.5 V. This is most important since the input protection network will limit the signal amplitude and cause clipping. The F20A High Voltage Linear Amplifier is equipped with a microfuse rated at 15 mA, which will be blown if the input voltage exceeds 300% of the maximum.
Other Dual Channel High Voltage Linear Amplifiers
Full and small-signal frequency responses without load (red and orange marks) and with 400 pF capacitive load (blue and green marks), respectively, are shown in the diagram below: