WSTS Savannah, Georgia 12-15 May, 2025  booth #8

11.04.2025

Pendulum Instruments will be exhibiting at the ATIS Workshop on Synchronization and Timing Systems (WSTS) in Savannah, Georgia. We’re excited to be among the exhibitors showcasing our time and synchronization solutions. Conference attendees will have the chance to explore the FTR-210R GNSS-Disciplined Frequency and Time Reference, as well as the CNT-104S Multi-Channel Frequency Anal

EMV 2025  25-27 March 2025, Stuttgart Germany. Joint Exhibition with dataTec & Shieldex. Hall C2, Booth # 605

18.02.2025

Pendulum Instruments is pleased to announce its return to EMV, the international exhibition and conference on electromagnetic compatibility. For the first time, three companies have teamed up to promote complete pre-compliance solutions for EMC  testing.

We are proud to collaborate with dataTec, our esteemed distributor in Germany and Shieldex our supplier of dedicated EMC  ten

ITM/PTTI 2025 Long Beach, California, January 27-30, 2025

19.12.2024

Pendulum Instruments we will be exhibiting at the Institute of Navigation’s ITM/PTTI 2025 taking place January 27–30, 2025 at the Hyatt Regency Long Beach in Long Beach, California. This will be the fifth consecutive year Pendulum Instruments is a part of this esteemed conference.  Visit our team at booth #4 – to network with us and learn more about Pendulum solutions for adv

Pendulum Instruments launches  the CNT-104R, a 4-channel Rubidium Frequency Calibrator/Analyzer for  metrology applications

04.12.2024

Pendulum Instruments, a global expert in time and frequency measurement, analysis, and calibration, today announced the new CNT-104R Multi-channel Rubidium Frequency Calibrator/Analyzer.

Expanding Pendulum’s Multi-channel Frequency Analyzer (MFA) family, the CNT-104R is the third instrument in the series, supporting parallel and independent time/frequency measurements in a benc

FTR-210R GNSS disciplined Frequency & Time Reference

22.10.2024

Pendulum Instruments, a global expert in the measurement, analysis, and calibration of Time and Frequency, today announced that its FTR-210R GNSS disciplined Rubidium Frequency & Time Reference was recognized among the best by the 2024 Military + Aerospace Electronics Innovators Awards program. A Silver nomination in the Test & Measurement Category was bestowed upon Pendulum Ins

Online webinar: FTR-210R GNSS disciplined Frequency & Time Reference

16.10.2024

We are excited to invite you to the Official Launch Webinar of the new Pendulum FTR-210R GNSS disciplined Rubidium Frequency and Time Reference with optional traceability. Register now for an exclusive opportunity to dive deeper into the key features and benefits of this innovative product.

Date: 24th October 2024

⏰ Time: 10:00 AM – 10:30 AM CEST

🔗 Register now:

ht

Pendulum Instruments introduces a traceable RubidiumFrequency Reference

16.10.2024

Pendulum Instruments, the global expert in time & frequency measurement, analysis, and calibration, announces today the release of the new FTR-210R GNSS disciplined Rubidium Frequency and Time Reference.

The FTR-210R is an ultra-stable Frequency & Time Reference with unique built-in optional traceability to UTC. The internal Rubidium atomic clock is controlled by the global navig

ELECTRONICA 2024

17.07.2024

12-15 November, Munich A3: Booth #161

Pendulum Instruments is excited to announce our participation in Electronica 2024, the world’s leading trade fair for the electronics industry. We invite you to visit us at Booth A3.161, where we will showcase Pendulum’s latest technologies, products, and solutions.

Join us in Munich for this premier event to gain deep insights into cutti

EMC Europe 2024

14.07.2024

2-5 September Bruges, Belgium, Joint Exhibition with CNRood, Booth #32

Pendulum Instruments is excited to announce our participation in EMC Europe, the international symposium and exhibition on electromagnetic compatibility, held in the beautiful city of Bruges. We are honoured to collaborate with our esteemed Benelux distributor, CNRood. We warmly invite you to visit our joint

IEEE MTT-S IMS 2024

24.05.2024

IEEE MTT-S IMS 2024 Washington, DC  USA, June 18-21 June, 2024 Booth: #2124

IEEE MTT-S International Microwave Symposium is your annual chance to connect with thousands of RF and microwave professionals from around the world. Pendulum Instruments along with 540+ exhibitors, will be showcasing solutions to address the latest technology advancements in this fast-growing market sec

Online webinar: CNT-100 Multi-Channel Frequency Analyzers

23.05.2024

We are excited to invite you to the CNT-100 Multi-Channel Frequency Analyzers online webinar where we’ll delve into the revolutionary features of the CNT-100 series of Multi-Channel Frequency Analyzers – a new platform for time & frequency metrology, high-end R&D, and test systems for time & frequency.

Date: June 06, 2024

⏰ Time: 10:00 – 10:30 am  CEST https://events.zoom.u

Pendulum Instruments introduces a budget 2-channel Frequency Counter/Analyzer

07.03.2024

Pendulum Instruments, the global expert in time & frequency measurement, analysis, and calibration, announces today the release of the new CNT-102 Multi-channel Frequency Analyzer.

The CNT-102 is the second member of the recently introduced Multi-channel Frequency Analyzer family, offering the world’s first 2-channel UFC (Universal Frequency Counter), with parallel independent

Pendulum webshop

18.01.2024

We are excited to inform you that the Pendulum Instruments Web shop has been launched. We made a significant decision to open an online shopping platform as we see the growing importance of digital presence in the global market and would like to expand the Pendulum brand internationally. Pendulum Instruments Webshop will operate globally in all the regions not subject to political s

ITM/PTTI 2024 Long Beach, California, January 22-25, 2024

14.12.2023

Pendulum Instruments will be exhibiting at the Institute of Navigation’s ITM/PTTI 2024 taking place January 22–25, 2024 at the Hyatt Regency Long Beach in Long Beach, California. We’re pleased to be participating in ITM/PTTI 2024 for the fourth consecutive year. Visit our team at booth #11 – to network with us and learn more about Pendulum solutions for advanced timing analy

Honored by 2023 MAE Innovators Awards

25.10.2023

Pendulum Instruments is proud to announce that its CNT-104S Multi-channel Frequency Analyzer was recognized among the best by the 2023 MAEInnovators Awards. Votes placed by the engineering community recognized PendulumInstruments as a Gold in the Military + Aerospace Electronics Innovators Category.The 2023 MAE Innovators Awards celebrates outstanding innovation in defense and aer

ITSF  2023, 30 October - 2 November, Antwerp, Belgium. Booth: 18

Pendulum Instruments will be attending the 2023 International Timing and Sync Forum.

ITSF is the largest conference in the world which focuses on time and synchronisation gathering the global industry together for three days packed with critical discussion, unrivalled industry networking, world-class speakers and a cutting-edge exhibition. Come to booth #18 to meet our team and seize the oppor

EuMW  2023  17 – 22 September  Berlin, Germany Booth:457C

The 26th edition of European Microwave Week will come to Berlin.  The annual European Microwave Exhibition, which is by far the largest RF and microwave trade show in Europe, is held in conjunction with the conferences. The exhibition also includes a series of technical seminars and exhibitor workshops describing commercial products and processes. In addition, EuMW 2023 includes the Forum on Def

EMC  Europe 2023 4-8 September Cracow, Poland  Booth: T21

Pendulum is going to take part in EMC Europe 2023. It is the  International Symposium on Electromagnetic Compatibility which is organized every year in one prominent city in Europe. In 2023 it is time for Cracow, Poland. We are going to showcase Detectus SCN  EMC  scanners for detecting EMC  hotspots in your designs.

General Information

IEEE IFCS-EFTF 2023, 15-19 May, Toyama, Japan

Pendulum Instruments will be attending the 2023 Joint Conference of the IEEE International Frequency Control Symposium & European Frequency and Time Forum will be held in conjunction with the Asia-Pacific workshop on Time and Frequency in Toyama, Japan.

Visit our team at booth #3-5 and do not miss a chance to see and learn more about NEW  CNT-104S Multi-Channel Frequency Analyzer.

To lear

EMV 2023 Booth C2-221 March 28-30, Stuttgart Germany

PendulumInstruments will be exhibiting at EMV 2023, the trade fair and workshops, in Stuttgart from 28 – 30 March 2023. This event is Europe’s leading platform for electromagnetic compatibility. We are going to present Detectus EMC scanner SCN-500 series, our powerful pre-compliance system for detecting EMC hotspots in your designs. You will also have a chance to talk about other products fro

ITM/PTTI 2022 23-26 January 2023, Long Beach, California

01.12.2022 

We’re pleased to announce that will be exhibiting at the upcoming Institute of Navigation ITM/PTTI 2023 meeting taking place January 23–26, 2023 at the Hyatt Regency Long Beach in Long Beach, California.

The Precise Time and Time Interval Systems and Applications (PTTI) meeting is an annual conference sponsored by ION with a technical program designed to: disseminate and co

Pendulum Instruments introduces a 4-channel Frequency Counter/Analyzer 

14.11.2022 

Pendulum Instruments, the global expert in time & frequency measurement, analysis, and calibration, announces today the release of the new CNT-104S Multi-channel Frequency Analyzer.

The CNT-104S combines the performance and characteristics of high performance Universal Frequency Counters (UFC) and Time Interval Analyzers (TIA), offering the world’s first 4-channel UFC in a be

Pendulum Instruments exhibiting at Electronica 2022.

19.09.2022 

Pendulum is going to take part in  Electronica November 15-18, November 2022, Munich, Germany – the world’s leading trade fair and conference for electronics.   Electronica covers technologies, products and solutions in the entire electronics industry. In the last physical edition, more than 3.000 exhibitors hosted 85.000 visitors from 101 countries. After 4 year break caus

Pendulum Instruments exhibiting at EMC Europe 2022 September 6-7,  Gothenburg, Sweden.

Pendulum is going to take part in EMC Europe 2022 – International Symposium on Electromagnetic Compatibility which is organized every year in one prominent city in Europe. In 2022 it is time for Gothenburg.  The visitors can meet our team at booth G03:01 where we are going to present  Detectus SCN  EMC  scanners, our powerful system for detecting EMC  hotspots in your designs. You will also

Pendulum Instruments acquires FLC Electronics

Stockholm Jan 7, 2020. 

Pendulum Instruments, the global expert in time & frequency measurement, analysis and calibration, announces today the purchase of FLC Electronics AB, experts in high-voltage linear amplifiers and arbitrary pulse pattern generators. The company is based in Gothenburg, Sweden, and has sold its products to large electronics companies and renowned institutes all over the

Pendulum Instruments opens office in China

Stockholm June 8, 2020. Pendulum Instruments, the global expert in time & frequency measurement, analysis and calibration, announces the opening of a Chinese office in Beijing.

The company, whose headquarter is based in Sweden/Poland, has since 2018 also a sales and support office in USA.

China is an important export market for Pendulum Instruments, and the company has since its new start i

Pendulum Instruments acquires Detectus AB

1st of July, Pendulum Instruments announces that the company has acquired Detectus AB, a leading Swedish company in EMC scanner technology for pre-compliance testing.

The Detectus product line measures the electromagnetic emission, immunity, and heat, of components, boards, cables, and products over a wide bandwidth. Emphasize is put on ease-of-use, so that any engineer, not only EMC experts,